• Add the first stage to the valve making sure that the yoke knob is fac-
ing away from the diver. See "D" in Figure 6.
• Fasten the 2nd stage regulator hose over the neck using the three
Velcro attachments. See "B" & "C" in Figure 6. (Note: The Velcro Fas-
tener behind the neck is hidden in this view.)
• Fasten the pressure gauge hose vertically using the Velcro attach-
ment. See "C" in Figure 6
• Fasten the hose to the Power Inflator using the Quick Disconnect fit-
ting. Once the QD fitting is fastened, use the Velcro Fastener to hold it in
place. See "A" in Figure 6
• Turn the tank valve on carefully listening for leaks. If any leaks are
heard, do not dive with the unit until the cause of the leakage is corrected.
Fig. 6
11
Kommentare zu diesen Handbüchern